Completed bathroom with large format wall and floor tile

European tile installation

Tile Installation in Scottsdale, Tempe and the Phoenix Area

Large format tile, wet areas, and pattern layouts installed by the team connected to the showroom. We work with tile selected here or supplied by the client.

One accountable project conversation

One Team to Hold Responsible

When the tile comes from one company and the installer from another, a cracked corner or hollow sounding floor can become an argument about responsibility. The supplier points at the installation, the installer points at the material, and the client is left between them.

Modern European Tile connects product selection, technical review, and installation. The scope begins with the actual tile and the actual room, so material requirements are settled before work starts.

The showroom advantage

We Know the Material Before We Set It

Current tile references stand at full size in the South Scottsdale showroom. The team can review format, edge, finish, thickness, and intended application before the first box reaches the project.

That matters most with rectified tile, structured faces, large panels, and transitions where a small difference changes the setting plan.

Plan a showroom visit
Large European porcelain surfaces shown across walls and floor

Large format installation

What Large Format Asks of the Installer

As tile grows, the tolerances shrink. Every surface is checked and prepared for the selected tile before setting, because a surface variation that small tile may forgive can appear as lippage under a large panel.

The largest field tile in the current catalog is 47 by 23.5 inches. Setting it requires a planned layout, controlled mortar coverage, back buttering, movement joints, and the right leveling method while the bed cures.

Eighty-one of the 126 current references are rectified. Their narrow grout joints only work when the substrate and setting out are resolved before installation begins.

Completed tiled shower with niches mosaic floor and brass fixtures

What happens beneath the tile

Shower Waterproofing Is a Method

Tile is the visible finish. The membrane, slope, sealed penetrations, and the check before tile are what keep water where it belongs.

A wet-area assembly is built to the selected system specification. Curbs, niches, corners, and the drain are treated as one continuous system before tile conceals the work.

Explore shower waterproofing

A normal part of our work

Your Tile or Ours

We install tile that Modern European Tile did not supply. The review starts with the same questions we ask about showroom products: format, thickness, edge, finish, quantity, approved application, and the condition of the surface beneath it.

Bring a piece or the manufacturer specification to the showroom. For failed installations, we diagnose cracked tile, hollow areas, or opening grout before preparing a repair scope.

Before installation starts

Know What the Installation Proposal Covers

The installation proposal should separate tile supply from the work needed to fit it. Confirm the measured areas, existing finish removal, disposal, substrate corrections, layout, grout and edge treatment. If you supply the tile, provide its manufacturer specification and available quantity before the installation is priced.

Access, furniture, appliances and retained finishes also affect the job. Agree who moves or disconnects those items and which separate trades are needed. Hidden conditions found during removal are agreed as a change before work continues. The schedule includes the installation products’ curing requirements and the point when normal use can resume.

For designers and builders, drawings and product references help establish the scope. A site assessment resolves the conditions that a drawing cannot show. The same review applies to a small replacement and a larger installation, with the detail proportionate to the work.

The scope covers as much of the project as you choose: the tile alone or the whole room, agreed in writing. The written scope carries the figure; the price depends on the tile format, the area, and what has to come out first.

What We Often Find in Valley Homes

  • Surfaces out of flat

    Older floors and walls are rarely flat enough for large tile; every surface is checked and prepared before setting.

  • HOA working hours

    Community rules can limit when work and deliveries happen; the schedule is planned around them.

  • Tight access

    Narrow stairs, gates and corridors decide how large panels reach the room, so access is checked at the site visit.

  • No elevator

    Upper-floor homes without an elevator need the material carried up, which is planned before delivery.

A clear path to the finished surface

How an Installation Job Runs

  1. Site Visit and Measure

    We review the room, access, surfaces, and the work already in place.

  2. Substrate Assessment

    Flatness, moisture, and required corrections enter the written scope.

  3. Layout and Scope

    Tile direction, pattern starts, transitions, and visible cuts are agreed before setting.

  4. Installation and Review

    The work moves through setting, finishing, cleanup, and a final walkthrough.

Formats applications and details

What We Install

The scope is based on the room and product, not a one-size-fits-all installation package.

01

Large Format Tile

Floor and wall formats with the preparation and handling their size requires.

02

Porcelain Plank Floors

Wood-look planks in straight, staggered, and herringbone layouts.

03

Showers and Wet Areas

Pans, walls, curbs, niches, and benches built as one waterproofed assembly.

04

Wall Tile and Mosaics

Field tile, structured faces, mosaics, trims, and finished edges.

05

Outdoor Porcelain

Manufacturer-approved porcelain selected for the intended exterior application.

06

Patterns and Transitions

Herringbone, brick bond, grid layouts, thresholds, and final transitions.

07

Removal and Replacement

Failed showers and damaged floors diagnosed before the repair is quoted.

08

Client Supplied Tile

Material from another supplier reviewed and installed through the same process.

Visit the Showroom

Bring measurements, photos of the surfaces as they are, and, if you are supplying the tile, a piece or its manufacturer specification. A preliminary measure comes before the written scope, and we reply to quote requests within 24 hours. Visit the showroom or call (602) 885-8075.

Contracting services are performed by MPP Group Service Inc, a licensed Arizona contractor (ROC 345369). Read what clients say on Google.

Areas we serve across the Phoenix area: Phoenix, Scottsdale, Tempe, Mesa, Chandler, Paradise Valley, Arcadia and Fountain Hills.