Grey concrete look floor tile around a dark kitchen island

Island cladding

Kitchen Island and Waterfall Tile in Scottsdale

Porcelain panels on the sides and ends of your kitchen island, planned around the countertop, the floor and the stools.

Interior inspiration

Island Faces to Compare

Face first: match the backsplash for one language, or contrast it so the island reads as an object. The edge and the coverage come next, and all three are settled against your counter sample in the showroom, because the island’s top is the fixed point everything must agree with.

Wall panels from our collections are not countertop slabs, so a waterfall in slab is a countertop decision. We supply countertops as well as tile, so both options can be compared.

White kitchen with an island, bar stools and light wood wall cabinets
Interior inspiration

Tile Cladding or a Slab Waterfall

Tile cladding
Porcelain panels on the sides or ends of the island. The measurements set the joints and cuts, and the substrate must suit the installation. Stool contact, outlet openings and the junction at the floor are planned before the first cut.
Slab waterfall
The countertop continues down the end of the island. Countertops are part of our offer, supplied through our team or a subcontractor, and the slab and its fabrication are agreed in the scope: see countertop slabs.
Corners and edges
Mitered for the monolithic look or trimmed. A mitered edge is checked with the actual material and is not promised for every decorative or structured tile.

The island is part of the kitchen. Backsplash and island can be decided together: see kitchen backsplash and kitchen cabinets.

How the Island Job Runs

  1. Bring the island and the counter sample

    The island dimensions, the countertop information and photos of its visible sides, and whether the cabinetry is existing or new.

  2. Measure and written scope

    A preliminary measure, then the written scope with preparation, coverage, corner treatment and target dates.

  3. Confirm the structure and the layout

    Final cladding dimensions depend on the structure that carries it. The layout is agreed once they are confirmed, before decorative or cut-sensitive pieces are ordered.

  4. Junctions, finish and sign-off

    Joints where panel meets counter and floor are sealed and finished. You sign off the work and every change at the walkthrough.

Hidden conditions found during removal are agreed as a change before work continues.

Corners and Vertical Faces in Our Projects

Vertical tile and turning corners our team installed in two finished bathrooms (Modern European Tile project photography). See the full projects: Geometric Guest Bath and Wood and Concrete Spa Bath.

“Great products and installation. Professional and efficient.”

Neil, Google review · Read our Google reviews

Who This Is For and What It Costs

Homeowners
Bring the island dimensions and photos of its visible sides. We hold the candidates against your counter sample.
Designers and builders
Send the island drawings and the countertop information. The layout is agreed after the structure’s dimensions are confirmed.
New or existing cabinetry
Tell us which it is. The cladding depends on the structure that will carry it.

Cost context

Full waterfall on both ends, one end or faces only is a budget decision as much as a design one. That is why the written scope gives the figure for your island, and it sets target dates.

What changes the cost:

  • the number of faces
  • waterfall ends
  • mitered corners
  • the tile you choose and the preparation behind it

What the Job Includes

  • Face cladding

    Sides and ends of the island, with the layout planned to the piece.

  • Waterfall ends

    Tile-clad ends, or a slab that continues from the countertop and is agreed in the scope.

  • Corner and edge treatment

    Mitered or trimmed, stated in the scope.

  • Junctions and details

    Joints where panel meets counter and floor are sealed and finished. Outlet and overhang details are planned before the first cut.

Island Questions

Another question? Call (602) 885-8075.

Is tile on an island the same as a slab waterfall?

No. A tiled end and a fabricated slab waterfall are different assemblies, and the material, support, edge treatment and scope must be confirmed for the option you choose. See countertop slabs for the slab side.

Do you supply the countertop?

Yes. Countertops are part of our offer, supplied through our team or a subcontractor and specified per project from the real measurements.

Can the corners be mitered?

It depends on the material. A mitered edge is judged with the actual tile in hand, not promised for every decorative or structured tile.

What should I bring?

The island dimensions, the countertop information, photos of the visible sides, and whether the cabinetry is existing or new.

Kitchen islands in the Phoenix area

Bring the Island, the Counter Sample and Photos of Its Sides

Bring the island dimensions, the countertop information and photos of its visible sides, and tell us whether the cabinetry is existing or new. A preliminary measure comes before the written scope, and we reply to quote requests within 24 hours. The showroom visit is free and Saturday visits are by appointment: visit the showroom.

Contracting services are performed by MPP Group Service Inc, a licensed Arizona contractor (ROC 345369). We work across the Phoenix area: Phoenix, Scottsdale, Tempe, Mesa, Chandler, Paradise Valley, Arcadia and Fountain Hills.